Getting to grips with handspun

I've been spending quite a bit of time peddling away on my spinning wheel (Ashford Traveller), trying out various fibres and trying to get the hang of it.  I'm pretty sure I've not got a classic style or indeed spin "properly" but to be honest as long as I create something I'd be able to make something with then surely thats OK?

Here's some of my efforts, some more successful than others as you can see.  The big blue ball sitting on top is Merino/Silk blend and was lovely to spin - this is done 3 ply (as is the brown ball that its sitting on).

At the other end of the scale is the ball of silk (over on the left), that was really tricky to spin - if you have rough hands (as I do all winter!) the fibre sticks to your hands and the fluff gets everywhere.  Also I didn't realise just how much twist you need to put into silk.  For a first attempt I'm not too disappointed, its a little inconsistent and there are a fair few fluffy bits in the yarn - but overall its OK, and good enough for me to try making a little lacy scarf with it.  I'll post the results of that adventure when I get closer to finishing.

The others are camel - right at the front, merino in the middle, generic "wool" at the back and the black one at the right side is black shetland.

I'll post again with close up photos of the yarns when I get a moment.

My first attempts at spining

I have had my spinning wheel for almost 1 month and now that I have worked out how to setup it up I am starting to get into actually spinning some yarn.

 One of my first attempts is this generic wool top.



Its pretty inconsistent and lumpy .....



You can see some of the areas look like actual yarn, but others are pretty fluffy!

But I don't like to give up so I kept on going and spun this from some Grey Suffolk wool tops.



I think I am getting a little better with my consistency



Don't get me wrong, I know its a long way from perfect and I still have a LOT to learn about plying but I feel like I am making some progress - what do you think?

I'll keep posting with further progress or if I actually make anything with this yarn I am creating :)

Learning about my spinning wheel

I've been trying really hard to learn how to use my new spinning wheel - don't let the folks at the craft shows fool you, its not nearly as easy as they make it look!

First off I had my wheel set up completely wrong - I have a double treadle, double drive wheel.  The wheel comes with a scotch break, so I was confused about what I was supposed to do with it.  I have subsequently learned that I have a piece of my wheel I don't need to use - the scotch break

The picture below shows the WRONG setup.  I was using the scotch break and putting the drive bands around the flyer whorl. 

What I should have done was remove the scotch break completely, put one drive band round the other end of the bobbin and one drive band round the flyer whorl.

What I have also recently found is article in eHow which discusses changing the tension with an Ashford traveller double drive.  Now I understand why the wheel came with a scotch break at all!!

I think I am managing to get a little better with my spinning - I don't think I have my technique quite sorted out yet.  I am still struggling with drafting and not letting the twist get back into the bulk of the fibre,  I am having to control the twist by slowly letting it travel down the drafted fibre until I meet the bulk by just slightly releasing my pinch on the drafted fibres and sliding my fingers back along the fibres until I meet the bulk.  Then I pinch hard to stop the twist completely and then draft out the next little piece of fibre.  I know its not a classic or indeed correct approach but I don't think I have sufficient control of the speed and density of twist yet to just let it fly.

I decided that I would try to make things easier for myself by getting some pencil roving - the theory being if I don't have to draft then that I removing one complication, I  just have to control the twist.

Well as they say "the best laid plans of mice and men" .... the fibre is lovely, its 100% pure wool and very finely drafted from Cornish Wools. But sadly my talent is not up to the job.  When I tried to spin it, it just breaks immediately - I simply cannot get any twist into it - I have absolutely no idea what I am doing wrong and the experiment has just proved how much I have to learn.

In an effort to not waste such lovely fibre I decided to try spinning two thicknesses of the fibre together.  I have no idea if this was smart or not - but after a few false starts it "seems" to be working.... for now ... we'll see.